CUVA Installation Best CCSP Bootcamp Training in Delhi Gurgaon

Network Bulls
www.networkbulls.com
Best Institute for CCNA CCNP CCSP CCIP CCIE Training in India
M-44, Old Dlf, Sector-14 Gurgaon, Haryana, India
Call: +91-9654672192

CUVA installation includes the following steps:
Step 1 Verify hardware requirements.
Step 2 Verify software requirements.
Step 3 Install CUVA software and hardware.
Table 19-3 displays the recommended installation requirements to install CUVA.
The minimum requirement for the operating system of the PC is either Microsoft Windows
2000 Professional with Service Pack 4 or later or Microsoft Windows XP Professional with
Service Pack 2 or later. CUVA 2.1 supports the Microsoft Windows Vista operating system.
Table 19-3 CUVA Installation Requirements
PC Feature Minimum Requirements
CPU CUVA using H.263:
1.9 GHz or higher Pentium IV or compatible processor (Streaming SIMD
Extensions support required)
CUVA using H.264:
2.4 GHz or higher Pentium IV or compatible processor (Streaming SIMD
Extensions support required)
2.8 GHz or higher compatible processor recommended
System memory 512 MB minimum, 1 GB recommended
Free disk space At least 100 MB, 200 MB when being used with Cisco IP Communicator
USB port At least 1 free USB (1.1 or 2.0 compliant) port, Version 2.0 recommended
Video display Minimum: DirectX 9.0-compatible graphics card with 32 MB of video RAM;
for dual-headed configurations, 64 MB
Recommended: DirectX 9.0-compatible graphics card with 64 MB of video
RAM; for dual-headed configurations, 128 MB
Network Minimum: 10/100 network interface card (NIC)
NOTE Ensure CAST connectivity between the Cisco IP Telephony device and CUVA
application. A host-based intrusion prevention system or personal firewall might block
this communication by default.
CUVA Installation 499
Launch the installation file and complete these steps (illustrated in Figure 19-7):
Step 1 Make sure that the Cisco VT Camera is not connected to the PC.
Step 2 Follow the instructions in the dialog boxes that appear to complete the
installation of CUVA:
• In the Welcome window, click Next to start the Installation wizard.
• In the License Agreement window, click I Accept the Terms in the License
Agreement, and then click Next.
• In the Destination Folder window, accept the default installation folder or click
Change to enter a different installation folder. When you have finished, click
Next.
• In the Ready to Install the Program window, click Install and wait until you
see the Shortcut Options window. Depending on the setup of your PC and the
operating system that you use, there might be additional windows or messages
that require your attention before you get to the Shortcut Options window.
• In the Shortcut Options window, make your choices about icons to be added to
the Quick Launch bar or to the desktop. You can also choose whether you want
CUVA to be started automatically at system startup. Click Next when you have
made your selection.
• A window appears indicating that the installation has been completed. Confirm
the message by clicking Finish.
• If you are prompted to restart the PC, click Yes to restart the PC.
Step 3 When prompted by the installation, plug in the camera. All necessary
drivers are installed to the system.
Step 4 After the new hardware has been added, the PC needs to be rebooted.
CUVA is ready to be used.